Network Antennas - CAPTOR SYSTEMS LTD

Ubiquiti UISP airFiber 11GHz Dish Radio and Duplexer Kit | AF11-Complete-LB

Details Ubiquiti's AF-11KIT includes an AF-11 radio, an AF-11G35 35dBi dish antenna and an AF-DUPL single low band duplexer. Ubiquiti's AF-11 radio is built for outdoor Point-to-Point bridging and carrier-class network back-hauls using the 11GHz licensed radio band. Ubiquiti's custom silicon and proprietary radio architectures are explicitly designed for long-distance, low latency applications. It offers superior long-range performance and high throughput. The AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific license specifications and requirements. It also features different channel widths to suit your deployment needs and allows you to configure TX and RX channel frequencies independently. Users are also able to program uplink and downlink duty cycles to suit their networking needs on the other end of the link. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiberX 5GHz 23dBi 45° Slant Dish Antenna | AF-5G23-S45

Details Ubiquiti's AIR-D523X is a 5GHz 23dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquiti radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Ubiquiti UISP airFiber 5XHD 5GHz Radio | AF-5XHD

Details Ubiquiti's AF-5XHD is designed for use in the 5GHz frequency band offering channel bandwidths of up to 100MHz, GPS synchronization and uses airOS LTU, manageable via UISP. The AF-5XHD is designed to work with Ubiquiti® airFiber X slant-polarized antennas for improved noise immunity and signal-to-noise ratio but is also compatible with other dish antennas in the Ubiquiti range. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiberX 5GHz 30dBi 45° Slant Dish Antenna | AF-5G30-S45

Details Ubiquiti's AIR-D530X is a 5GHz 30dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquity radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Skip to the beginning of the images gallery Ubiquiti UISP airMAX 5GHz 30dBi Dish Antenna | RD-5G30

Add to Compare Details Ubiquiti's AIR-D530 is a 5GHz 30dBi dish antenna designed to seamlessly integrate with the Ubiquiti Radios. Incorporating a dish reflector design for excellent beam directivity, the AIR-D530 features a robust mechanical design using industrial-strength hardware for outdoor applications. *Note: Radio not included

Ubiquiti UISP airMAX 5GHz 30dBi Light Weight Dish Antenna | RD-5G30-LW

Details Ubiquiti's AIR-D530LW is a 5GHz 30dBi lightweight dish antenna designed to seamlessly integrate with the Ubiquiti Radios. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 34dBi Dish Antenna | RD-5G34

Details Ubiquiti's AIR-D534 is a 5GHz 34dBi dish antenna designed to seamlessly integrate with the Ubiquiti Radios. Incorporating a dish reflector design for excellent beam directivity, the AIR-D534 features robust mechanical design using industrial-strength hardware for outdoor applications. *Note: Radio not included.

Ubiquiti UISP airFiberX 5GHz 34dBi 45° Slant Dish Antenna | AF-5G34-S45

Details Ubiquiti's AIR-D534X is a 5GHz 34dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquiti radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Ubiquiti UISP airMAX 5GHz 10dBi Omni Antenna | AMO-5G10

Details Ubiquiti's AIR-O510 is a 5GHz 10dBi, 360° airMAX Omni antenna designed to seamlessly integrate with Ubiquiti Radio's. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 13dBi Omni Antenna | AMO-5G13

Details Ubiquiti's AIR-O513 is a 5GHz 13dBi, 360° airMAX Omni antenna designed to seamlessly integrate with Ubiquiti Radio's. *Note: Radio not included.

Ubiquiti UISP airMAX 2GHz 15dBi 120° Sector Antenna | AM-2G15-120

Details Ubiquiti's AIR-S215 is a 2GHz 15dBi, 120° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 16dBi 120° Sector Antenna | AM-5G16-120

Details Ubiquiti's AIR-S516 is a 5GHz 16dBi, 120° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 17dBi 90° Sector Antenna | AM-5G17-90

Details Ubiquiti's AIR-S517 is a 5GHz 17dBi, 90° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 20dBi 90° Sector Antenna | AM-5G20-90

Details Ubiquiti's AIR-S520 is a 5GHz 20dBi, 90° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX AC 5GHz 21dBi 60° Sector Antenna | AM-5AC21-60

Details Ubiquiti's AIR-S521AC is a 5GHz 21dBi, 60° airMAX ac, sector antenna designed to seamlessly integrate with Ubiquiti's AC Rockets providing noise isolation and improved beam performance in co-location deployments. *Note: Radio not included.

Ubiquiti UISP airMAX AC 5GHz 22dBi 45° Sector Antenna | AM-5AC22-45 Retail Price Incl VAT: R4,525.00

Details Ubiquiti's AIR-S522AC is a 5GHz 22dBi, 45° airMAX AC sector antenna designed to seamlessly integrate with Ubiquiti's AC Rockets providing noise isolation and improved beam performance in co-location deployments. *Note: Radio not included.

Skip to the beginning of the images gallery 3G/4G 6dBi Desktop Antenna with SMA Male

Details Scoop's ANT-4GD desktop antenna is designed for LTE/GSM/3G/WiFi wireless communications

Locally Sourced

MikroTik mANT30 5.8GHz 30dBi Precision Alignment Dish | MTAD-5G-30D3-PA

Details MikroTik's ANT-D530PA is a 5GHz 30dBi dish antenna and precision alignment mount built to accommodate the BaseBox series of products. It can also be used with any pole-mounted, 5GHz wireless device due to the adequate length of the included FlexGuide cable. *Note: Radio not included

MikroTik LoRa 6.5dBi Antenna Kit | 868_Omni_antenna

Details MikroTik's ANT-LORA is a 6.5 dBi Omni Antenna for the 824-928MHz frequency range. This device includes a 1m SMA cable and a mechanical holder for quick and easy mounting on masts 25-50mm.

MikroTik mANT LTE 5o 5dBi Omni Antenna | MTAO-LTE-5D-SQ

Details MikroTik's ANT-MLTE is a 5dBi LTE Omni Antenna operating on the 699 - 2690 MHz frequency range. The device housing is a flat design for easy mounting, but the antenna itself is omni directional and does not have to be accurately pointed, allowing for simple installation.

MikroTik Dual Band High Gain Outdoor Whip Antenna | HGO-antenna-OUT

Details MikroTik's ANT-O25 is a dual band, outdoor, RP SMA whip antenna featuring 3.3dBi gain on 2.4GHz and 5.5 - 7.1dBi on 5.8GHz. Pair this antenna with any dual band access point with RP SMA Female connectors to create a dual band outdoor access point.

Cudy Dual Band WiFi 5 1200Mbps Outdoor Access Point | AP1300 Outdoor

Details Cudy's CD-AP1300O is an IP65 outdoor dual-band WiFi 5 (802.11ac) Access Point. The unit features detachable 5dBi antennas, a Gigabit Ethernet port, up to 5 VLAN/SSID's and an aggregate wireless data rate of up to 1167Mbps. The unit accepts a wide voltage range of 24V-57V and includes mounting kits for both wall and pole mount. This Access Point supports multiple VPN options including PPTP, L2TP, OpenVPN, WireGuard, IPSec and ZeroTier. It also features support for Cudy's whole home mesh system. When used with either the CD-WR1300 or CD-M1300 as the main router running the latest firmware, the AP can be easily adopted onto the existing network.

Cudy Dual Band WiFi 6 3000Mbps Outdoor Access Point | AP3000 Outdoor

Details Cudy's CD-AP3000O is an IP65 outdoor, dual-band, WiFi 6 (802.11ax) Access Point. The unit features detachable high-gain antennas, a shielded Gigabit Ethernet port , up to 5 VLAN/SSID's and an aggregate wireless data rate of up to 2976Mbps. The unit is powered by 802.3at PoE, and includes mounting kits for both wall and pole mount. This Access Point supports multiple VPN options including PPTP, L2TP, OpenVPN, WireGuard, IPSec and ZeroTier. It also features support for Cudy's whole home mesh system, when used with either the CD-WR3000 or CD-M30001 as the main router running the latest firmware, the AP can be easily adopted onto the existing network.

Cudy Dual Band WiFi 5 xPON Router | GP1200

Details Cudy's CD-GP1200 is an xPON WiFi 5 router featuring 4-Stream dual-band WiFi 5, 1x SC/APC Slot, 4x Gigabit Ethernet Ports, GPON/EPON dual modes, CWMP, OMCI, 4-queue QoS, and EasyMesh

Cudy 4G LTE4 Dual Band 1200Mbps WiFi 5 Router | LT500

Details Cudy's CD-LT500 is a dual band WiFi 5 (802.11ac) Fast Ethernet router with an integrated LTE Cat 4 Modem with speeds of up to 50Mbps uplink and 150Mbps downlink. The router features 4x Fast Ethernet ports, 4x 5dBi high gain antennas and an aggregate wireless data rate of up to 1167Mbps. The router supports Cudy's whole home mesh system as well as multiple VPN Client options including PPTP, L2TP, OpenVPN, WireGuard, IPSec and ZeroTier.

Ubiquiti UISP airMAX LiteAP AC 5GHz 16dBi 120° Radio | LAP-120

Details Ubiquiti's LAP-516AC is an airMAX ac 5GHz radio with 16dBi, 120° sector antenna. It is designed as a lightweight, cost-effective PtMP (point to multipoint) access point solution. The bracket requires minimal tools for adjustment to simplify installation.

Ubiquiti UISP airMAX LiteAP AC 5GHz 17dBi 90° Radio with GPS | LAP-GPS

Details Ubiquiti's LAP-517AC is an airMAX ac 5GHz radio with 17dBi, 90° sector antenna with GPS. It is designed as a lightweight, cost-effective PtMP (point to multipoint) access point solution. The GPS radio is used in co-location environments to assist with mitigating interference. The bracket requires minimal tools for adjustment to simplify installation. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX LiteBeam M5 5GHz 23dBi Radio | LBE-M5-23

Details Ubiquiti's LBE-523 is an airMAX M series 5GHz radio with a 23dBi antenna. It is designed as a lightweight, cost-effective, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX LiteBeam AC XR 5GHz 29dBi Radio | LBE-5AC-XR

Details Ubiquiti's LBE-529ACXR is an airMAX AC 5GHz radio with a 29dBi antenna. It is designed as a lightweight, long-range, CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Loco AC 5GHz 13dBi Radio | LOCO5AC

Details Ubiquiti's LOCO-5ACL is an airMAX AC 5GHz radio with a 13dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) solution or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Loco AC 5GHz 13dBi Radio 5pk | LOCO5AC-5

Details Ubiquiti's LOCO-5ACL5 is a 5-pack airMAX AC 5GHz radio with a 13dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) solution or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy setup via the UISP network management platform.

Ubiquiti UISP airMAX Loco M2 2GHz 8dBi Radio | LOCOM2

Details Ubiquiti's LOCO-M2 is an airMAX M series 2GHz radio with a 10dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam AC 2GHz 13dBi Radio | NBE-2AC-13

Details Ubiquiti's NBE-213AC is an airMAX AC 2GHz radio with a 13dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam M5 5GHz 16dBi Radio | NBE-M5-16

Details Ubiquiti's NBE-516 is an airMAX M series 5GHz radio with a 16dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam AC 5GHz 19dBi Radio | NBE-5AC-Gen2

Details Ubiquiti's NBE-519ACG2 is an airMAX AC 5GHz radio with a 19dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. It features 24v passive PoE pass-through. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoStation 5AC 5GHz 16dBi Radio | NS-5AC

Details Ubiquiti's NS-5AC is an airMAX AC 5GHz radio with a 16dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. It features 24v or 48v passive PoE pass-through. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoStation M5 5GHz 16dBi Radio | NSM5

Details Ubiquiti's NSM5 is an airMAX M series 5GHz radio with a 16dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 2GHz 18dBi Radio | PBE-2AC-400

Details Ubiquiti's PBE-218AC is an airMAX AC 2GHz radio with an 18dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam M5 5GHz 22dBi Radio | PBE-M5-300

Details Ubiquiti's PBE-522 is an airMAX M series 5GHz radio with 22dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam M5 5GHz 25dBi Radio | PBE-M5-400

Details Ubiquiti's PBE-525 is an airMAX M series 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Radio | PBE-5AC-Gen2

Details Ubiquiti's PBE-525ACG2 is an airMAX AC 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Radio 5 Pack | PBE-5AC-Gen2-5

Details Ubiquiti's PBE-525ACG2-5 is an airMAX AC 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Isolator Radio | PBE-5AC-ISO-Gen2

Details Ubiquiti's PBE-525ACISO is an airMAX AC 5GHz radio with a 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. The isolator/radome cover provides better antenna shielding and protects it in harsh environments. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Rocket Prism AC 2GHz Radio | R2AC-PRISM

Details Ubiquiti's R2AC-PRISMG2 airMAX ac 2GHz radio without antennae. Featuring airPrism technology which significantly reduces adjacent channel interference and is designed to work with Ubiquiti's wide range of antennas (sold separately). It can be used as PtMP (point to multipoint) access point in high interference environments or for high-performance, long-range PtP (point to point) links. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform. *Note: Antenna not included.

Ubiquiti UISP airMAX Rocket Prism AC 5GHz Radio | RP-5AC-Gen2

Details Ubiquiti’s R5AC-PRISMG2 is an airMAX ac 5GHz radio featuring airPrism technology. The airPrism significantly reduces adjacent channel interference and is designed to work with Ubiquiti’s wide range of antennas. It can be used as PtMP (point-to-multipoint) access point in high interference environments or for high-performance, long-range PtP (point-to-point) links. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform. *Note: Antenna not included.

MikroTik ATL18 Kit LTE18 Wide Band Outdoor CPE | ATLGM&EG18-EA

Details MikroTik's RB-ATL18 features a Category 18 LTE modem, 1x Micro SIM Slot, 1x Gigabit Ethernet port with PoE-in and 4x4 MIMO support. The unit also supports a wide frequency band with 4x high gain antennas supporting 1.7 – 2.7 GHz and 2x low band antennas supporting 700 MHz – 1 GHz, LTE Band 28.

MikroTik ATL 5G R16 16dBi Wide Band Outdoor CPE | ATLGM&RG520F

Details MikroTik's RB-ATL5G features a 5G LTE modem, 1x Micro SIM Slot, built-in eSIM support, 1x Gigabit Ethernet port with PoE-in and 4x4 MIMO support. The unit also supports a wide frequency band with 4x high-gain middle-band antennas and 4 low-band antennas, including Band 28 support for both long-range LTE and 5G.

MikroTik Active GPS antenna for LtAP mini LTE Kit | ACGPSA

Details MikroTik's RB-GPS is an active GPS antenna for the 1575.4 MHz GPS frequency. The antenna is waterproof with IP67 rating and includes a 5m cable which allows you to bring the antenna outside and mount it with the included magnet, or double-sided tape. When paired with the RB-LTAP, it provides accurate geographical coordinates of your router, even when it is mounted indoors.