ELECTRIC FENCING SYSTEMS - CAPTOR SYSTEMS LTD

10Amp Solar Regulator – LED

🔍 10Amp Solar Regulator - LED This LED solar regulator offers advanced Maximum Power Point (MPP) technology for over 90% efficiency when used with a 140Watt solar panel. It can also be used with solar panels sizes from 20Watt to 200Watts making it very flexible. Larger than the 140Watt solar panels can be used in areas where sunlight intensity is low increasing the capture of sunlight.

10Amp Solar Regulator – LED

2-Way Gate Contact

The 2-Way Gate Contact is used for wiring live wires in series onto a sliding gate. The robust construction using stainless steel and brass makes it suitable for outdoor use in most climates. The large location plates allow for increased tolerance and easier installation.

2-Way Gate Contact

2Amp Power Pack (incl. 7Ah Battery)

2Ah-Power-Supply The Nemtek power pack, supplied with battery, provides a stable power source and back-up power during an AC mains power failure. 2Amp battery back-up power supply Housing includes a compartment for the 7Ah battery (included) Lightning and power surge protection Easy to install with any Nemtek security energizer

2Amp Power Pack (incl. 7Ah Battery)

3 Core Mylar Screened Cable

Mylar screened cable is used to connect the Nemtek tension sensors to the FG7C or Node controller. Communication cable to connect the sensors to the controller

3 Core Mylar Screened Cable

3-Way Gate Contact

Effective short to earth detection over sliding gates Heavy duty design for all weather types 2 live and 1 earth connectors with lugs Available with brass cable connectors or crimp lug connectors Large location plates allow for increased tolerance Mounting bracket available

3-Way Gate Contact

Alarm Communication Cable

Slim look for indoor use White in colour Stranded cores for better conductivity

Alarm Communication Cable

Aluminium Enclosures

Aluminium EnclosuresAluminium Enclosures - Image 2Aluminium Enclosures - Image 3Aluminium Enclosures - Image 4 The aluminium enclosure is ideal for housing energizers and accessories. It is weatherproof and can be used in coastal areas due to the aluminium finish. It has a stainless steel lock and key, and air vents for cooling Features: Ventilated for cooling Wooden electrically isolated backing plate for mounting the energizers and accessories Large capacity to house double energizers, solar regulator and deep cycle batteries The shock box version is used for securing the box and its contents by electrifying the box itself Specifications: Material Aluminium tread plate with a wooden internal back mounting board Stainless steel hinges and locks

Aluminium Enclosures

Aluminium HT Cable (A-Series)

Ideal cable when aluminium wire is used Low electrical resistance reducing power and voltage drops over large distances The 3 core A-Series reduces installation time 30m 3 core cables are suitable for Wizord 2, Wizord 4, Merlin 4i, Druid 13LCD, Druid 15LCD, Druid 18LCD, Druid 25LCD and Druid 28LCD energizers 100m 3 core cables are suitable for Wizord 2, Wizord 4, Merlin 4i, Druid 13LCD, Druid 15LCD and Druid 18LCD energizers Max distance of 3 core cables suitable for Merlin M18S and Merlin M28S is 15m

Aluminium HT Cable (A-Series)

Bolt-type Line Clamp

The Bolt-type Line Clamps are used to join and electrically connect cables and wires. This line clamp ensures that a good electrical connection is maintained between the joints so that the electric fence functions correctly

Bolt-type Line Clamp

Battery Boxes

These battery boxes offer outdoor protection for the 50Ah and 100Ah battery and allows you to have portable 12V power for a range of outdoor uses.

Compression Spring 2 (CNT2)

The Compression Spring 2 is used to maintain a constant tension on the electric fence wires. Wire tension on an electric fence will vary over time and the springs will maintain a constant force on the electric fence wires to keep them taut.

Compression Spring 2 (CNT2)

Coach Screw and Plug

Coach screw and plugs are ideally used with the Nemtek square tube brackets Features: For coastal use 8mm x 75mm in length including wall plug and washer

Coach Screw and Plug

Compression Spring 1 (CNT)

The Compression Spring 1 is used to maintain a constant tension on the electric fence wires. Wire tension on an electric fence will vary over time and the springs will maintain a constant force on the electric fence wires to keep them taut

Compression Spring 1 (CNT)

Bridging Wires

Reduces installation time, with an aesthetic and neat finish

Conductive Earthing Compound

The Conductive Earthing Compound is used where earthing conditions are poor, are dry or sandy soil, and where earth spikes alone are not sufficient. This compound will help to improve earthing, but will not necessarily solve all problems. Always keep your earthing areas wet. An irrigation system will ensure the best conditions for good earthing.

Conductive Earthing Compound

Cut-Out Switch

Designed for outdoor use Ideal for all electric fence installations Lever arm lockable with padlock for security, in open or closed position Terminal nut tool included Cut-Out switch with LED – integrated flashing LED array to indicate the voltage on the fence Cut-Out Switch with LED – lights visible from up to 1km at night and 100m during the day

DATS Bridging Wires

Bridging wires reduce installation time with an aesthetically pleasing and neat finish. They connect and loop the ends of an electric fence circuit. Features: Neat finish and easy to install Available in 100mm and 200mm stainless steel and galvanised finish Reduces installation time Hard to cut

DATS Bridging Wires

Deep Cycle Lead Acid Batteries

Nemtek’s deep-cycle batteries are designed to deliver steady, reliable power over long periods of use. Unlike standard batteries that provide short bursts of energy, deep-cycle batteries can be discharged and recharged repeatedly without reducing their performance or lifespan. They’re ideal for electric fencing solar-powered security and agricultural applications – anywhere consistent, long duration energy is needed.

Deep Cycle Lead Acid Batteries

Directional Fault Finder and Fence Meter

The patented Nemtek Directional Fault Finder and Fence Meter measures the electrical condition of an electric fence. By holding the meter against the fence wire the meter will turn on automatically when it detects a fence voltage. The fence meter will automatically turn off after a few seconds when not in use. The long battery life allows for simple operation and storage. Features: Patented fence probe offers more accurate readings Quickly and easily locates faults along the fence line Large LCD display for easy reading Displays current, voltage and the direction of a fault Lightweight with a convenient belt clip Slimline rugged design with a water-resistant case Low battery warning Automatic energizer polarity detection Can be used with most energizers

Directional Fault Finder and Fence MeterDirectional Fault Finder

Distance Measuring Wheel

The distance measuring wheel is a quick walk along tool for measuring distances. Features: Suitable for land and road precision measurement Illuminated panel with button Counter adds when moving forward and subtracts in reverse Folding handle with switch light Attachable kick stand and carry bag

Distance Measuring Wheel

Double Pole Lightning Protection

Lightning can cause serious damage to your energizer. When lightning strikes close to (or directly on) an electric fence, it causes a massive surge in voltage which flows back to your energizer. The only fool proof method to avoid damage to your energizer during an electric storm is to disconnect it from the fence line and from the mains’ power supply. For your personal safety, this is NOT recommended, as it will compromise your security. A practical alternative to this is to install a Nemtek Double Pole Lightning Protector which offers a two pronged approach. Firstly it inhibits the lightning surge from damaging the energizers and secondly it diverts any lightning surge away from the energizers into the ground through the earth spikes.

Double Pole Lightning Protection

Druid 13LCD Energizer

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

Druid 13LCD Energizer

Druid 15LCD Energizer

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms. Features: 4.6 Joule output energy (single zone) Robust and flexible design for home and commercial security Built-in alarm monitors tampering or faults on the high voltage and earth fence wires Connectable to armed response radio or GSM module Lightning and power surge protection Intelligent power saving to extend battery life Easy-to-use tag included for controlling the energizer Walk test mode for easy fence testing The LCD background colour changes to easily identify the fence condition Powered by 240V mains and includes built-in battery for back-up power Built-in gate alarm input to monitor if the gate is open or closed Optional keypad for controlling and programming the energizer. This allows the user to control the energizer remotely, with up to two keypads

Druid 15LCD Energizer

Druid 18LCD Energizer

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

Druid 18LCD Energizer

Druid 20LCD Fence Monitor

This low voltage Druid 20LCD Fence Alarm Monitor is used to monitor fences in public areas or areas where an electric fence would be a legal concern, like a school. As the unit uses a pulse below 50V, animals or people touching the fence will not receive a shock, making it safe. An alarm will still be triggered if the wires are cut or shorted. This low voltage Fence Monitor allows the initial 1.5m of a fence in a public space to be monitored and the remaining height of the fence can still be electrified using a security energizer.

Druid 20LCD Fence Monitor

Druid 25LCD Energizer

🔍 Druid 25LCD Energizer The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms. Synchronisation between energizers can be achieved by using traditional network cabling or by the Druid synchronisation modules which use orbiting satellites and eliminate the need for cabling between the energizers.

Druid 25LCD Energizer

Druid 28LCD Energizer

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms. Synchronisation between energizers can be achieved by using traditional network cabling or by the Druid synchronisation modules which use orbiting satellites and eliminate the need for cabling between the energizers.

Druid 28LCD Energizer

Druid Dual Zone Keypad

The Druid dual zone energizers can also be controlled and programmed with the optional LED dual zone keypad. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user

Druid Dual Zone Keypad

Druid Four Zone Keypad

Two Druid dual zone energizers can be controlled and programmed with the optional LED four zone keypad to form a four zone system. The energizers can be installed near the fence and the keypad can be located where it is most convenient for the user. Features: The fence voltage outputs can be adjusted using the keypad The siren and gate outputs can be bypassed using the keypad The four zone keypad can be used with either of these energizer models: D25LCD, D28LCD Can individually control and arm/disarm zones

Druid Four Zone Keypad

Druid Relay Expansion Card

The Druid Relay Expansion Card can be used to increase the number of information outputs from the Druid 25LCD or Druid 28LCD energizers, and can be installed in the energizer housing. It has four inputs which can be used to switch the individual zones on/off and to switch between high and low voltage for each zone. Features: 4 digital inputs 10 relay outputs Robust surge protection is included on all inputs and outputs All relays can be individually configured to be independent dry contacts or common-ground wet contacts with 12V nominal output 3 programmed settings to choose from Low battery indicator Zone 1 and 2 alarms and fence check alarms Service and tamper conditions Communication timeouts

Druid Relay Expansion Card

Druid Single Zone Keypad

The single zone Druid energizers can also be controlled and programmed with the optional LED single zone keypad. The energizer can be installed near the fence and the keypad can be located where it is most convenient for the user Features: Up to two keypads can be connected to one energizer The fence voltage outputs can be adjusted using the keypad The siren and gate outputs can be bypassed using the keypad The single zone keypad can be used with any of these energizer models: D13LCD, D15LCD, D18LCD, D114LCD.

Druid Single Zone Keypad

Druid Synchronisation Module

Synchronisation between energizers has traditionally been done by physically connecting the energizers through wiring. The ground breaking Nemtek synchronisation module now synchronises Druid dual zone energizers using satellites eliminating the need for wiring between energizers, saving on costs and making the installation quicker and easier. Brochure Documents

Druid Synchronisation Module

Dual Action Tension Sensor DATS2

The patented Nemtek Dual Action Tension Sensor DATS2 can detect a change of tension in the fence wire. It uses the electric fence monitoring circuit to create an alarm condition on the energizer. The dual action increases the likelihood of an intruder being detected and reduces the possibility of tampering. There are two models available to cater for different wire types; the TS-DATS2/XL is used with the galvanised and aluminium fence wires and the TS-DATS2/SS for the stainless steel wires. Detection range (straight line) up to 50m.

Dual Action Tension Sensor DATS2

Dual Action Tension Sensor DATS3

The patented Nemtek Dual Action Tension Sensor DATS3 can detect a change of tension in the fence wire. It uses the electric fence monitoring circuit to create an alarm condition on the energizer. The dual action increases the likelihood of an intruder being detected and reduces the possibility of tampering. There are two models available to cater for different wire types; the DATS3/XL is used with the galvanised and aluminium fence wires and the DATS3/SS for the stainless steel wires. Detection range (straight line) up to 50m.

Dual Action Tension Sensor DATS3

Earth Live Loop

Earth live loops are used to enhance the level of security offered by an electric fence by detecting attempted separation of fence wires. By creating a connection between 2 live wires and leaving just enough room for natural movement of the earth wire, the alarm will sound as the earth wire touches the earth live loop. Features: Installed onto the fence wire, generally on the live wires Easy to retrofit onto an existing electric fence

Earth Live Loop

Earth Spike – Copper – 1.2m (nut/washer)

The copper cladded earth spike or stake is used to earth the electric fence system. A minimum of 3 earth spikes must be knock into the ground near the electric fence at a minimum of 1.2m apart. Connect these earth spikes to the energizer or the fence using the high tension insulated cable (HT). In areas where earthing conditions are bad you may be required to add a few more earth spikes/stakes along the fence line and connect these back to the energiser.

Earth Spike – Copper – 1.2m (nut/washer)

Earth Spike – HDG – 1.2m (nut/washer)

The galvanised earth spike or stake is used to earth the electric fence system. A minimum of 3 earth spikes must be knock into the ground near the electric fence at a minimum of 1.2m apart. Connect these earth spikes to the energizer or the fence using the high tension insulated cable (HT). In areas where earthing conditions are bad you may be required to add a few more earth spikes/stakes along the fence line and connect these back to the energiser. Features: • Hot-dip galvanised with nuts and washers • Available in both 1.0m and 1.2m lengths • The double nut and washer allow for a good electrical connection with the HT cables Earthing kit available, to be used in areas where the earthing conditions are poor. These kits include a conductive earth compound (EA-CEC)

Earth Spike – HDG – 1.2m (nut/washer)

Earth Spike – HDG – 1m (nut/washer)

• Hot-dip galvanised with nuts and washers • Available in both 1.0m and 1.2m lengths • The double nut and washer allow for a good electrical connection with the HT cables Earthing kit available, to be used in areas where the earthing conditions are poor. These kits include a conductive earth compound (EA-CEC)

Earth Spike – HDG – 1m (nut/washer)

Enclosure Stand U-Bolt

The Enclosure Stand U-Bolt can be used with concrete to secure the enclosure stand into the ground.

Enclosure Stand U-Bolt

Enclosure Stands

There are two stands sizes available for mounting the aluminium enclosures. These stands can be secured or bolted into concrete to support the Nemtek enclosures 1.2m off the ground. These stands are strong enough to support the enclosures and solar panels where a solar solution is required, and are ideal in areas where there is no place to secure the aluminium enclosure. Two Enclosure Stand U-Brackets can be set in concrete allowing the stand to rest on the four protruding bolts. The small stand is used with the small aluminium enclosure. The large stand is used with the large or XL aluminium enclosure, and also can be used with a shock box setup.

Enclosure Stands

Enclosure: Pole Mount Kit

The Nemtek Energizer Enclosure Pole Mount Kit is designed to be used in conjunction with any of Nemtek’s three aluminium Energizer Enclosure products Features: Available in a shock box pole mount and standalone pole mount kit Supplied in sets of 2 Quick and easy to install Maximum pole size of 76mm in diameter

Enclosure: Pole Mount Kit

Energizer Tag

This tag is used to switch Nemtek energizers on/off. Features: Fits onto a keyring Nemtek energizers can be reset using this tag Included and used with the: Agri 30,50,80,150 and 200 mains energizers Agri Solar 1,3,5 and 8 energizers with internal battery Agri Solar 10, 25 and 50 with external battery Druid 114 mains energizer with battery back-up or solar

Fence Meter Pouch

Fence Meter pouch to store and protect the Fence Meter tool Features: Slim rugged design Can be clipped to your belt Durable Manufactured from hardy material for longevity

Fence Meter Pouch

Fence Scope Multi Tool

The Fence Scope is a 4 in 1 multi tool that helps diagnose problems on your fence to optimize electric fence installation and ensure that the fence continues to operate at ideal levels. There are four operation modes to select from: Fence Probe mode – quickly indicates the direction of a fence fault, showing the voltage and current Fence energy mode – accurately measures the output energy along the fence. This mode can be used to test the size of the shock the intruder will receive at any point along the fence by simulating the intruder. This helps to ensure that the voltage and the energy is sufficient along the entire fence to deliver an appropriate shock to the intruder. Fence scope mode – this can record and display wave forms of the electric fence pulse. Distortions in the wave form (wave shape) generally indicate that there are fence faults. Fence noise mode – this shows the amount of electromagnetic interference generated by the fence or energizer. This feature assists in finding cracked or broken insulators, sparks and shorts along the fence.

Fence Scope Multi Tool

Fence Scope Multi Tool Pouch

Fence scope pouch to store and protect the Fence scope 4 in 1 multi tool. Features: Slim rugged design Can be clipped to your belt Durable Manufactured from hardy material for longevity

Fence Scope Multi Tool Pouch

Fence Tester – Easy

The frequency of the flashing LEDs will change as the voltage increases or decreases. The slower the flashing rate, the lower the voltage. The intensity of the light remains the same so it can be seen from far irrespective of the fence voltage. It is installed between the earth and live wire to indicate the status and condition of the fence for peace of mind

Fence Tester – Easy

Ferrules

Ferrules are used to join the conductive electric fence wires permanently. This is a high security wire connection because it cannot be removed.

FG7C – Nemlink Internal Card + TW

Ethernet communication and fits inside the FG7C controller. Input included for the Tension Wire sensors [E-TWS1]

FG7C – Nemlink Internal Card + TW