Ubiquiti - CAPTOR SYSTEMS LTD

Ubiquiti UISP airFiber 11GHz Radio | AF-11

Ubiquiti's AF-11 radio is built for outdoor Point-to-Point bridging and carrier-class network back-hauls using the 11GHz licensed radio band. Ubiquiti's custom silicon and proprietary radio architectures are explicitly designed for long-distance, low latency applications. It offers superior long-range performance and high throughput. The AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific license specifications and requirements. It also features different channel widths to suit your deployment needs and allows you to configure TX and RX channel frequencies independently. Users are also able to program uplink and downlink duty cycles to suit their networking needs on the other end of the link. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiber 11GHz High Band Duplexer | AF-11-DUP-H

Ubiquiti UISP airFiber 11GHz High Band Duplexer | AF-11-DUP-H

Ubiquiti UISP airFiber 11GHz Radio | AF-11

Details Ubiquiti's AF-11 radio is built for outdoor Point-to-Point bridging and carrier-class network back-hauls using the 11GHz licensed radio band. Ubiquiti's custom silicon and proprietary radio architectures are explicitly designed for long-distance, low latency applications. It offers superior long-range performance and high throughput. The AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific license specifications and requirements. It also features different channel widths to suit your deployment needs and allows you to configure TX and RX channel frequencies independently. Users are also able to program uplink and downlink duty cycles to suit their networking needs on the other end of the link. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiber 11GHz High Band Duplexer | AF-11-DUP-H

Details Ubiquiti's AF-11DUPH is a duplexer used to enable the use of high band frequencies on the AF-11. A single duplexer is required for a SISO configuration, whereas two units are required for MIMO.

Ubiquiti UISP airFiber 11GHz Low Band Duplexer | AF-11-DUP-L

Details Ubiquiti's AF-11DUPL is a duplexer used to enable the use of low band frequencies on the AF-11. A single duplexer is required for a SISO configuration, whereas two units are required for MIMO.

Ubiquiti UISP airCube ISP WiFi Access Point | ACB-ISP

Details Ubiquiti's ACB-ISP is a 2.4Ghz, WiFi 4 Router/Access Point. It features 24V PoE pass-through to easily integrate with airMAX® CPEs. It is designed to work with the UISP network management platform.

Ubiquiti UISP airFiber 11GHz Dish Radio and Duplexer Kit | AF11-Complete-LB

Details Ubiquiti's AF-11KIT includes an AF-11 radio, an AF-11G35 35dBi dish antenna and an AF-DUPL single low band duplexer. Ubiquiti's AF-11 radio is built for outdoor Point-to-Point bridging and carrier-class network back-hauls using the 11GHz licensed radio band. Ubiquiti's custom silicon and proprietary radio architectures are explicitly designed for long-distance, low latency applications. It offers superior long-range performance and high throughput. The AF-11 can use single (SISO) or bonded (MIMO) channels, depending on your specific license specifications and requirements. It also features different channel widths to suit your deployment needs and allows you to configure TX and RX channel frequencies independently. Users are also able to program uplink and downlink duty cycles to suit their networking needs on the other end of the link. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiber 5XHD 5GHz Radio | AF-5XHD

Details Ubiquiti's AF-5XHD is designed for use in the 5GHz frequency band offering channel bandwidths of up to 100MHz, GPS synchronization and uses airOS LTU, manageable via UISP. The AF-5XHD is designed to work with Ubiquiti® airFiber X slant-polarized antennas for improved noise immunity and signal-to-noise ratio but is also compatible with other dish antennas in the Ubiquiti range. This device is managed via the UISP network management platform.

Ubiquiti UISP airFiberX 5GHz 23dBi 45° Slant Dish Antenna | AF-5G23-S45

Details Ubiquiti's AIR-D523X is a 5GHz 23dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquiti radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Skip to the beginning of the images gallery Ubiquiti UISP airMAX 5GHz 30dBi Dish Antenna | RD-5G30

Add to Compare Details Ubiquiti's AIR-D530 is a 5GHz 30dBi dish antenna designed to seamlessly integrate with the Ubiquiti Radios. Incorporating a dish reflector design for excellent beam directivity, the AIR-D530 features a robust mechanical design using industrial-strength hardware for outdoor applications. *Note: Radio not included

Ubiquiti UISP airMAX 5GHz 30dBi Light Weight Dish Antenna | RD-5G30-LW

Details Ubiquiti's AIR-D530LW is a 5GHz 30dBi lightweight dish antenna designed to seamlessly integrate with the Ubiquiti Radios. *Note: Radio not included.

Ubiquiti UISP airFiberX 5GHz 30dBi 45° Slant Dish Antenna | AF-5G30-S45

Details Ubiquiti's AIR-D530X is a 5GHz 30dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquity radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Ubiquiti UISP airMAX 5GHz 34dBi Dish Antenna | RD-5G34

Details Ubiquiti's AIR-D534 is a 5GHz 34dBi dish antenna designed to seamlessly integrate with the Ubiquiti Radios. Incorporating a dish reflector design for excellent beam directivity, the AIR-D534 features robust mechanical design using industrial-strength hardware for outdoor applications. *Note: Radio not included.

Ubiquiti UISP airFiberX 5GHz 34dBi 45° Slant Dish Antenna | AF-5G34-S45

Details Ubiquiti's AIR-D534X is a 5GHz 34dBi, 45° slanted dish antenna designed to seamlessly integrate with Ubiquiti radios. The industrial design improves RF isolation to significantly reduce interference and deliver superior gain for high-capacity networks. *Note: AF-5XHD not included.

Ubiquiti UISP airMAX 5GHz 10dBi Omni Antenna | AMO-5G10

Details Ubiquiti's AIR-O510 is a 5GHz 10dBi, 360° airMAX Omni antenna designed to seamlessly integrate with Ubiquiti Radio's. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 13dBi Omni Antenna | AMO-5G13

Details Ubiquiti's AIR-O513 is a 5GHz 13dBi, 360° airMAX Omni antenna designed to seamlessly integrate with Ubiquiti Radio's. *Note: Radio not included.

Ubiquiti UISP airMAX 2GHz 15dBi 120° Sector Antenna | AM-2G15-120

Details Ubiquiti's AIR-S215 is a 2GHz 15dBi, 120° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 16dBi 120° Sector Antenna | AM-5G16-120

Details Ubiquiti's AIR-S516 is a 5GHz 16dBi, 120° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 17dBi 90° Sector Antenna | AM-5G17-90

Details Ubiquiti's AIR-S517 is a 5GHz 17dBi, 90° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX 5GHz 20dBi 90° Sector Antenna | AM-5G20-90

Details Ubiquiti's AIR-S520 is a 5GHz 20dBi, 90° airMAX sector antenna designed to seamlessly integrate with Ubiquiti Radios. The antenna features excellent cross-polarization isolation for improved noise resistance and superior beam performance. *Note: Radio not included.

Ubiquiti UISP airMAX AC 5GHz 21dBi 60° Sector Antenna | AM-5AC21-60

Details Ubiquiti's AIR-S521AC is a 5GHz 21dBi, 60° airMAX ac, sector antenna designed to seamlessly integrate with Ubiquiti's AC Rockets providing noise isolation and improved beam performance in co-location deployments. *Note: Radio not included.

Ubiquiti UISP airMAX AC 5GHz 22dBi 45° Sector Antenna | AM-5AC22-45 Retail Price Incl VAT: R4,525.00

Details Ubiquiti's AIR-S522AC is a 5GHz 22dBi, 45° airMAX AC sector antenna designed to seamlessly integrate with Ubiquiti's AC Rockets providing noise isolation and improved beam performance in co-location deployments. *Note: Radio not included.

Ubiquiti UniFi WiFi 7 Enterprise Tri-Band AP | E7

Details This product can be purchased as normal or as part of the UniFi Partner Program, which provides exclusive benefits and further discounts for registered dealers. Find out more in our BLOG & complete the dealer registration FORM to apply.

Ubiquiti UISP airMAX IsoStation AC 5GHz 14dBi Horn Radio | IS-5AC

Details Ubiquiti's ISO-514AC is a shielded airMAX ac 5GHz radio with a 14dBi, 45° symmetrical horn antenna. It can be used as a PtMP (point to multipoint) access point in high-interference environments and is easily co-located due to its small size. It can also be used as a short-range CPE (client premises equipment). The antenna can be interchanged with any of the other horn antennas from Ubiquiti's range (sold separately). The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX LiteAP AC 5GHz 16dBi 120° Radio | LAP-120

Details Ubiquiti's LAP-516AC is an airMAX ac 5GHz radio with 16dBi, 120° sector antenna. It is designed as a lightweight, cost-effective PtMP (point to multipoint) access point solution. The bracket requires minimal tools for adjustment to simplify installation.

Ubiquiti UISP airMAX LiteAP AC 5GHz 17dBi 90° Radio with GPS | LAP-GPS

Details Ubiquiti's LAP-517AC is an airMAX ac 5GHz radio with 17dBi, 90° sector antenna with GPS. It is designed as a lightweight, cost-effective PtMP (point to multipoint) access point solution. The GPS radio is used in co-location environments to assist with mitigating interference. The bracket requires minimal tools for adjustment to simplify installation. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX LiteBeam M5 5GHz 23dBi Radio | LBE-M5-23

Details Ubiquiti's LBE-523 is an airMAX M series 5GHz radio with a 23dBi antenna. It is designed as a lightweight, cost-effective, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX LiteBeam AC XR 5GHz 29dBi Radio | LBE-5AC-XR

Details Ubiquiti's LBE-529ACXR is an airMAX AC 5GHz radio with a 29dBi antenna. It is designed as a lightweight, long-range, CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Loco AC 5GHz 13dBi Radio | LOCO5AC

Details Ubiquiti's LOCO-5ACL is an airMAX AC 5GHz radio with a 13dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) solution or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Loco AC 5GHz 13dBi Radio 5pk | LOCO5AC-5

Details Ubiquiti's LOCO-5ACL5 is a 5-pack airMAX AC 5GHz radio with a 13dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) solution or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy setup via the UISP network management platform.

Ubiquiti UISP airMAX Loco M2 2GHz 8dBi Radio | LOCOM2

Details Ubiquiti's LOCO-M2 is an airMAX M series 2GHz radio with a 10dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam AC 2GHz 13dBi Radio | NBE-2AC-13

Details Ubiquiti's NBE-213AC is an airMAX AC 2GHz radio with a 13dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam M5 5GHz 16dBi Radio | NBE-M5-16

Details Ubiquiti's NBE-516 is an airMAX M series 5GHz radio with a 16dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX NanoBeam AC 5GHz 19dBi Radio | NBE-5AC-Gen2

Details Ubiquiti's NBE-519ACG2 is an airMAX AC 5GHz radio with a 19dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. It features 24v passive PoE pass-through. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoStation 5AC 5GHz 16dBi Radio | NS-5AC

Details Ubiquiti's NS-5AC is an airMAX AC 5GHz radio with a 16dBi antenna. It is designed as a lightweight, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) solution. It features 24v or 48v passive PoE pass-through. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX NanoStation M5 5GHz 16dBi Radio | NSM5

Details Ubiquiti's NSM5 is an airMAX M series 5GHz radio with a 16dBi antenna. It is designed as a lightweight, cost-effective, short-distance CPE (client premises equipment), PtP (point to point) or PtMP (point to multipoint) access point solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 2GHz 18dBi Radio | PBE-2AC-400

Details Ubiquiti's PBE-218AC is an airMAX AC 2GHz radio with an 18dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam M5 5GHz 22dBi Radio | PBE-M5-300

Details Ubiquiti's PBE-522 is an airMAX M series 5GHz radio with 22dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam M5 5GHz 25dBi Radio | PBE-M5-400

Details Ubiquiti's PBE-525 is an airMAX M series 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. It can be managed via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Radio | PBE-5AC-Gen2

Details Ubiquiti's PBE-525ACG2 is an airMAX AC 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Radio 5 Pack | PBE-5AC-Gen2-5

Details Ubiquiti's PBE-525ACG2-5 is an airMAX AC 5GHz radio with 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX PowerBeam AC 5GHz 25dBi Isolator Radio | PBE-5AC-ISO-Gen2

Details Ubiquiti's PBE-525ACISO is an airMAX AC 5GHz radio with a 25dBi antenna. The dish reflector provides the best antenna performance due to its high directivity and interference rejection characteristics. The isolator/radome cover provides better antenna shielding and protects it in harsh environments. It is designed as a high-performance, long-distance CPE (client premises equipment) or PtP (point-to-point) solution. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform.

Ubiquiti UISP airMAX Rocket Prism AC 2GHz Radio | R2AC-PRISM

Details Ubiquiti's R2AC-PRISMG2 airMAX ac 2GHz radio without antennae. Featuring airPrism technology which significantly reduces adjacent channel interference and is designed to work with Ubiquiti's wide range of antennas (sold separately). It can be used as PtMP (point to multipoint) access point in high interference environments or for high-performance, long-range PtP (point to point) links. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform. *Note: Antenna not included.

Ubiquiti UISP airMAX Rocket Prism AC 5GHz Radio | RP-5AC-Gen2

Details Ubiquiti’s R5AC-PRISMG2 is an airMAX ac 5GHz radio featuring airPrism technology. The airPrism significantly reduces adjacent channel interference and is designed to work with Ubiquiti’s wide range of antennas. It can be used as PtMP (point-to-multipoint) access point in high interference environments or for high-performance, long-range PtP (point-to-point) links. The dedicated 2.4GHz management radio allows for easy set-up via the UISP network management platform. *Note: Antenna not included.